欢迎访问昆明冶金高等专科学校学报官方网站,今天是 分享到:

昆明冶金高等专科学校学报 ›› 2017, Vol. 33 ›› Issue (5): 70-73.DOI: 10.3969/j.issn.1009-0479.2017.05.011

• 环境保护与化工技术 • 上一篇    下一篇

Pr-LaFeO 的甲醛气敏性能研究

林毓韬,张裕敏,荣 茜,邓宇翔,李腾忠   

  1. 1.昆明冶金高等专科学校机械工程学院,云南昆明650033;2.云南大学云南省高校纳米材料与技术重点实验室,云南昆明650091
  • 收稿日期:2017-04-07 出版日期:2017-12-19 发布日期:2017-12-19
  • 作者简介:林毓韬(1986-),男,广东潮州人,讲师,工学硕士,主要从事气敏材料及器件的研究。
  • 基金资助:
    2014年云南省应用基础研究计划项目青年项目:Pr-LaFeO的制备与丙酮气敏性能研究(2014FD062)。

On Formaldehyde Gas-sensing Properties of Pr-LaFeO

LINYutao,ZHANGYumin,RONGQian,DENGYuxiang,LITengzhong   

  1. 1.FacultyofMechanicalEngineering,KunmingMetallurgyCollege,Kunming650033,China;2.YunnanKeylaboratoryofNanomaterials&Technology,YunnanUniversity,Kunming650091,China
  • Received:2017-04-07 Online:2017-12-19 Published:2017-12-19

摘要: 利用微波辅助溶胶-凝胶法制备了Pr-LaFeO气敏材料,并将其制成烧结型旁热式敏感器件。气敏测试结果显示:组分含量x=mol(Pr)∶mol(Pr-LaFeO3) =1∶10的Pr-LaFeO元件对10mL/m3甲醛气体的灵敏度优于其它组分含量比的元件,另外,其响应时间约为60s,恢复时间约为240s。

关键词: 微波化学法, Pr改性, 甲醛气敏

Abstract: By sol-gel combined with microwave chemical method,this research prepared the gas-sensing materials of Pr-LaFeOand made them to sintered & heater-type sensors.The testing results show that the sensor of Pr-LaFeOsynthesized from x=mol(Pr) ∶mol(Pr-LaFeO) =1∶10 is superior to others in its sensitivity to formaldehyde of 10 mL/m.In addition,the response and recovery time are about 60 s and 240 s,respectively.

Key words: microwave chemical method, Pr modified, formaldehyde gas-sensing

中图分类号: