欢迎访问昆明冶金高等专科学校学报官方网站,今天是 分享到:

昆明冶金高等专科学校学报 ›› 2021, Vol. 37 ›› Issue (1): 10-13.DOI: 10.3969/j.issn.1009-0479.2021.01.002

• 冶金技术与材料 • 上一篇    下一篇

X射线荧光光谱法快速测定高碳锰铁合金中硅、锰、磷

张李斌,刘源江,袁 蕾   

  1. 武昆股份红河钢铁有限公司质量计量检测中心,云南 蒙自 661100
  • 出版日期:2021-04-29 发布日期:2021-06-15
  • 作者简介:张李斌(1985-),男,云南红河人,工程师,大学本科,主要从事冶金分析工作与研究。

Rapid Determination of Silicon,Manganese and Phosphorus in High-Carbon Ferromanganese Alloy by X-ray Fluorescence Spectrometry#br#

ZHANG Libin, LIU Yuanjiang, YUAN Lei   

  1. Quality Measurement and Testing Center of Honghe Iron and Steel Co. ,Ltd. , Wuhan Iron and Steel Co. ,Ltd. , Mengzi 661100,Yunnan,China
  • Online:2021-04-29 Published:2021-06-15

摘要: 采用X射线荧光光谱法定量分析高碳锰铁合金中硅、锰、磷元素含量,并利用国家标准样品辅以自制标样在设备软件中绘制工作曲线,根据工作曲线和ARL9900X荧光光谱仪测量强度,计算出高碳锰铁中硅、锰、磷元素含量。目前此方法已用于生产分析,可降低分析成本及人工劳动强度,同时还可避免人为因素所带来的不确定性,完全能够满足于日常生产分析要求。

关键词: 高碳锰铁, X射线荧光光谱法, 锰铁, 合金分析

Abstract: This article uses X-ray fluorescence spectroscopy to quantitatively analyze and determine thecontent of silicon ,manganese , and phosphorus in high-carbon ferromanganese alloys. The research meth-od uses national standard samples supplemented by self-made standard samples to draw a working curvein the equipment software. According to the working curve and ARL9900 X-ray fluorescence spectrometermcasures the intensity and calculates the content of silicon ,manganese,and phosphorus in high-carbonferromanganese. This method has been used for production analysis,which can reduce the analysis costand labor intensity ,and at the same time it avoids the uncertainty caused by human factors, and can fullymeet the requirements of daily production analysis.

Key words: high-carbon ferromanganese, X-ray fluorescence spectrometry, ferromanganese, alloy analysis

中图分类号: