欢迎访问昆明冶金高等专科学校学报官方网站,今天是 分享到:

昆明冶金高等专科学校学报 ›› 2016, Vol. 32 ›› Issue (3): 19-25.DOI: 10. 3969/j. issn. 1009—0479.2016.03.004

• 资源开发与测绘 • 上一篇    下一篇

国内某风化钦矿选厂脱泥试验研究

沈旭,张汉平   

  1. 昆明冶金高等专科学校矿业学院,云南昆明650033
  • 收稿日期:2016-04-13 出版日期:2016-07-23 发布日期:2016-07-23
  • 作者简介:沈旭(1963-),女,河南渐川人,高级工程师、副教授,工学学士,主要从事矿物加工研究、教学及选矿厂设计和教学管理工作。

Desliming Test on a Weathering Domestic Titanium Ore Dressing Plant

SHEN Xu,ZHANG Hanping   

  1. Faculty of Mining Engineering, Kunming Metallurgy College, Kunming 650033,China
  • Received:2016-04-13 Online:2016-07-23 Published:2016-07-23

摘要:

      对国内某典型的红土型风化钛矿选厂,采用高效倾斜板浓密机进行“脱泥—螺旋溜槽重选”的半工业试验研究,取得了较好的试验指标:1)采用高效倾斜板浓密机脱泥量可达到55%~60%,泥中TiO2品位仅为0.5%~0.9%,金属在泥中的损失率仅为5%~8%;2)脱泥后采用同样的螺旋溜槽重选,精矿TiO2品位可达33.54%,回收率达到86.58%;3)采用高效倾斜板浓密机脱泥工艺流程简单,生产操作可行;4)该试验研究结果,可为该选矿厂的技术改造提供可靠的技术支持。

关键词: 风化钦钛矿, 高效倾斜板浓密机, 脱泥

Abstract:

     Pilot-plant-scale tests of “desliming-spiral chute re-election” with inclined plane thickener have been conducted in a typical domestic laterite weathering titanium plant. Good test indicators are achieved: 1) amount of clay removal can reach 55%~60%, TiO2 in clay is only 0.5%~0. 9% and the loss rate of metal in mud is only 5% to 8% by using high efficiency inclined plate thickener; 2) after desliming, the same spiral chute was used to gravity separation. The content of TiO2 in concentrate can reach 33.54%, and the recovery rate is 86.58%; 3) the process is simple, the production operation is feasible by using the high efficiency inclined plate thickener; 4) the results of this study can provide reliable technical support for the technological transformation of the mineral processing plant.

Key words: weathering titanium ore, high efficient inclined plate thickener, desliming

中图分类号: