Welcome to HPMug2oMmNrOfxWQHLiEksa6s0hFu9Ox348d7QefarYlaFR5ArkhOwm3Da1pmxmxCtenj1+6luWD#r#n+EPn9L6Ce+9onqnMlT+i! Today is

HPMug2oMmNrOfxWQHLiEksa6s0hFu9Ox348d7QefarYlaFR5ArkhOwm3Da1pmxmxCtenj1+6luWD#r#n+EPn9L6Ce+9onqnMlT+i ›› 2020, Vol. 36 ›› Issue (5): 87-.DOI: 10.3969/j.issn.1009-0479.2020.05.018

Previous Articles     Next Articles

Optimization of Experimental Conditions for Simultaneous Generation of Electricity from Simulated Domestic Wastewater by Single Chamber Air Cathode Fuel Cell

XIE Leilei,CHEN Lisheng,LI Ran,WU Wenbin   

  1. ( Faculty of Environmental and Chemical Engineering, Kunming Metallurgy College, Kunming 650033, China)
  • Received:2020-09-05 Online:2020-10-27 Published:2023-12-14

Abstract: The microbial fuel cell was made with the activated sludge as a simulated domestic wastewaterfrom the anaerobic tank of one reclaimed water treatment station. The paper applies microbial fuel cell totreat domestic wastewater and generates electricity, which can realize the recovery and utilization of ener-gy while treating wastewater. The results show that when the glucose concentration is controlled at10 mmol · L-1 and the temperature is at 35 °C , it has the best electrochemical performance. The outputvoltage is 0. 326 V, the holding time is 1 120 min, the maximum output power density is 846. 87, the internal resistance is 240 Ω , and the COD removal rate is 46. 11% .

Key words: microbial fuel cell, air cathode, output voltage, power density, chemical oxygen demand(COD)

CLC Number: