欢迎访问昆明冶金高等专科学校学报官方网站,今天是 分享到:

昆明冶金高等专科学校学报 ›› 2012, Vol. 28 ›› Issue (3): 40-44.DOI: doi:10.3969/j.issn.1009-0479.2012.03.010

• 机械与电气工程 • 上一篇    下一篇

数控宏程序的工艺性及编程应用分析

邓宇翔,柳文灿,李腾忠   

  1. 昆明冶金高等专科学校 机械工程学院,云南 昆明 650033
  • 收稿日期:2012-02-11 出版日期:2012-06-18 发布日期:2012-06-18
  • 作者简介:邓宇翔(1978-),男,云南保山人,讲师,硕士,主要从事数控加工编程教学及研究。

ApplicationAnalysisonManufacturabilityandProgrammingofthe
NumericcontrolMacroprogram

DENG Yu-xiang,LIU Wen-can,LI Teng-zhong   

  1. FacultyofMechanicalEngineering,KunmingmetallurgyCollege,Kunming650033,China
  • Received:2012-02-11 Online:2012-06-18 Published:2012-06-18

摘要: 宏程序作为数控设备的一项重要功能,由于允许使用变量算术和逻辑运算以及各种条件转移等命令,
使其在编制一些加工程序时与普通方法相比显得方便和简单。探讨了FANUC数控系统加工工艺性分析要注意的
事项及宏程序的编程技巧,以期达到抛砖引玉的效果。

Abstract: AsanimportantfunctionoftheNCequipment,themacroprogramisavailableforusingsome
commands,suchasarithmeticvariable,logicalcalculusandconditionaltransferetc.Comparingwithor
dinarymethods,itiseasierandsimplertomakesomeprograms.Thispapermainlypresentssomenotes
aboutNCsystemofFANUCinprocessingmanufacturabilityanalysis

中图分类号: