Welcome to HPMug2oMmNrOfxWQHLiEksa6s0hFu9Ox348d7QefarYlaFR5ArkhOwm3Da1pmxmxCtenj1+6luWD#r#n+EPn9L6Ce+9onqnMlT+i! Today is

HPMug2oMmNrOfxWQHLiEksa6s0hFu9Ox348d7QefarYlaFR5ArkhOwm3Da1pmxmxCtenj1+6luWD#r#n+EPn9L6Ce+9onqnMlT+i ›› 2016, Vol. 32 ›› Issue (1): 5-9.DOI: 10.3969/j.issn.1009-0479.2016.01.002

Previous Articles     Next Articles

The Thermodynamics and the Condition of Sodium Silicate Prepared by Micro- silica Fume

ZHANG Jinliang,CAI Chuanxiong,YAO Chunling, LIU Zhennan,LI Yingjuan,NA Jia,TENG Yu   

  1. (Faculty of Metallurgy&Materials,Kunming Metallurgy College,Kunming 650033 ,China)
  • Received:2015-10-16 Online:2016-04-20 Published:2016-04-20

Abstract:

|Thermodynamics and the conditions of sodium silicate prepared by  micro-silica fume were study. The effects of reaction time,reaction temperature,the ratio of silicon base and the liquid-solid ratio on the leaching rate of SiO2 and modulus were investigated. The results demonstrated that sodium silicate prepared by  micro-silica fume is feasible.  The optimum preparation condition was obtained from the dissolution experiment: reaction temperature of 180 0C,the ratio of silicon base of 2. 5, the solid ratio of 10 mL/g and reaction time of 40 min.  The dissolution rate of Si02 and sodium silicon modulus were 77. 1% and  2. 3 respectively  under the optimum condition.

Key words: micro一silica fume, sodium silicate, dissolution rate, modulus

CLC Number: